Holmatro
Showing all 93 results
-
OmniShore Shoring System
First responders must be able to adapt to every possible situation. Have the ability to change tactics every step of the way. And be smart enough to always think ten steps ahead. -
Strut P20
-
Strut P30
-
Strut P40
-
Strut P60
-
Strut M10
-
Strut H20
-
OmniLock Strut P20OL
-
OmniLock Strut P30OL
-
OmniLock Strut P40OL
-
OmniLock Strut P60OL
-
Ratchet Base R24
OmniShore Ratchet Base for vehicle stabilization. -
Chain Adapter HPL110
OmniShore Chain Adapter for vehicle lifting. -
Multi Head HPL140
OmniShore Multi Head for use as a ram head adapter and as a base for the Chain Adapter -
OmniLock Nut OL01
OmniLock Nut for upgrading a pneumatic strut to an OmniLock strut: Simply replace the standard locknut by the OmniLock Nut. -
OmniLock Drive OL02
OmniLock Drive for electronic operation of an OmniLock strut. Operate the strut remotely with the Wireless Controller or use the buttons on the OmniLock Drive to operate the strut locally. -
Wireless Controller WLC50
Wireless Controller for remote operation of multiple OmniLock struts. -
Swivel Base BPL10
-
Swivel Base D-ring BPL11A
Large OmniShore Swivel Base for support against angled or tilting surfaces. -
Rigid Base BPL30
OmniShore Rigid Base for support against perpendicular surfaces. With nailing holes for fastening the base. -
Control Unit HTC12
Multifunctional pneumatic control unit with a working pressure of 12 bar / 174 psi. -
Pressure Reducer PRV 12
Pressure reducer for air bottles of 300 bar. Complete with 2 m hose -
Thrust Block TRB02
OmniShore Thrust Block for attachment of two struts to construct a solid sole raker. -
Bipod Base BPL12
OmniShore Bipod Base to construct a bipod for rope rescue applications. -
Tripod Head POD03
OmniShore Tripod Head to construct a tripod for rope rescue applications. -
Bipod Head POD02
OmniShore Bipod Head to construct a bipod for rope rescue applications. -
Monopod Head POD01
OmniShore Monopod Head to construct a monopod for rope rescue applications. -
Column Clamp CLA90C
OmniShore Column Clamp to link three struts together. For constructing a three strut column to support the heaviest loads. -
Beam Support HPL120
OmniShore Beam Support with nailing holes, for use with wooden beams up to 150 mm / 6 in. -
Flat Saddle HPL130
OmniShore Flat Saddle for support of a strut against a flat surface. -
Clamp CLA90
OmniShore Clamp to link struts for woodless bracing. To add stability and avoid movement in constructions such as rakers and square post shores. -
Nailing Pad CLA90N
OmniShore Nailing Pad for creating wooden braces. To add stability and avoid movement in constructions such as rakers and square post shores. -
Raker Rail RR150
OmniShore Raker Rail to distribute forces over a larger surface. For building constructions to support large structures and walls. -
Waler Rail WR01
OmniShore Waler Rail for trench wall support. -
Earth Nail HEN100
OmniShore Earth Nail to secure large base plates to the ground. -
Chain CWH60
OmniShore Chain for lifting heavy vehicles. -
Tie Down Keys TDK60
OmniShore Tie Down Keys for attaching a Ratchet Belt to different parts of a vehicle. -
Nut Winder MNW80
OmniShore Nut Winder to tighten or loosen the locknut from a distance. -
Load Indicator LSE01
OmniShore Load Indicator to signal load shifts in a construction. -
Ratchet Belt RBL80
OmniShore Ratchet Belt to secure a strut to a base. -
Carrying Strap CST90
OmniShore Carrying Strap for easy transportation of struts. -
Power Station PS01
Power Station for wired powering of up to 4 OmniLock Drives. -
Pneumatic 10 m Hose Set PHS2
Set with 10 m Air Hoses for operating Pneumatic OmniShore struts. Also suitable for operating Holmatro Lifting Bags and Stack Bags. -
Hand Pump PA 09 H 2 S 12
Compact and lightweight hand pump for powering single acting tools. -
Pull Restrictor PRS90
Patented OmniShore Pull Restrictor to convert a strut into a brace. The Pull Restrictor secures the locknut to the strut, allowing it to withstand pulling forces and sudden unintended movement. -
Raker Rail Pin RRP01
OmniShore Raker Rail Pin to attach bases to a Raker Rail or to connect a second rail. -
Shoring Hammer RS15
OmniShore Shoring Hammer for tensioning struts, hammering or pulling nails and multiple other purposes. -
Control Unit HDC12
Multifunctional pneumatic control unit with a working pressure of 12 bar / 174 psi. -
Pentheon Spreaders PSP60 / PSP50 / PSP40 / PSP40CL
Cordless Spreader, part of the Holmatro Pentheon Series. Designed to offer you unrivaled performance, superior usability, advanced connectivity and exceptional serviceability.
-
Pentheon Combi Tools PCT60 / PCT50
Cordless Combi Tool, part of the Holmatro Pentheon Series. Designed to offer you unrivaled performance, superior usability, advanced connectivity and exceptional serviceability. -
Pentheon Combi Tools PCT14 / PCT11
Cordless Combi Tool, part of the Holmatro Pentheon Series. Designed to offer you unrivaled performance, superior usability, advanced connectivity and exceptional serviceability. -
Pentheon Cutters PCU60 / PCU50 / PCU40 / PCU30CL
Cordless Inclined Cutter, part of the Holmatro Pentheon Series. Designed to offer you unrivaled performance, superior usability, advanced connectivity and exceptional serviceability. -
Mini Cutter CCU10
The first cordless Mini Cutter: compact, versatile and immediately ready for action. This cordless tool makes any rescue set complete.
-
Pentheon Telescopic Rams PTR50 / PTR40
Cordless Telescopic Ram, part of the Holmatro Pentheon Series. Designed to offer you unrivaled performance, superior usability, advanced connectivity and exceptional serviceability. -
Pentheon Rams PRA50 / PRA40
Cordless Telescopic Ram, part of the Holmatro Pentheon Series. Designed to offer you unrivaled performance, superior usability, advanced connectivity and exceptional serviceability. -
Pentheon Door Ram PDR200
Battery-powered double-acting Pentheon door ram. Designed for breaching inward opening doors with multiple locks. Also suitable for outward opening doors, when used in combination with a manual breaching tool. -
Battery Pump BP20
Battery-powered pump with two CORE connections for alternative tool operation (ATO). -
Combi Tool CT 5160
Heavy duty combi tool for spreading, cutting, squeezing and pulling - CORE version. -
Cutter CU 5040 i
New Car Technology Inclined Cutter - 5000 series. Lighter than ever, improved performance. With inclined cutting jaw for more ergonomic cutting above waist height or low on the car and to reduce the effect of tool movement towards the patient (e.g. when making a relief cut in the A-pillar). -
Cutter CU 5060 i
New Car Technology Inclined Cutter - 5000 series. Lighter than ever, improved performance. With inclined cutting jaw for more ergonomic cutting above waist height or low on the car and to reduce the effect of tool movement towards the patient (e.g. when making a relief cut in the A-pillar). -
Cutter CU 5050 i
New Car Technology Inclined Cutter - 5000 series. Lighter than ever, improved performance. With inclined cutting jaw for more ergonomic cutting above waist height or low on the car and to reduce the effect of tool movement towards the patient (e.g. when making a relief cut in the A-pillar). -
Cutter CU 5030 i CL
New Car Technology Inclined Cutter - 5000 series. Compact lightweight model, developed on the basis of practical application. With inclined cutting jaw for more ergonomic cutting above waist height or low on the car and to reduce the effect of tool movement towards the patient (e.g. when making a relief cut in the A-pillar). -
Door Blaster HDB 90 ST
Door opener for extremely fast door breaching. Designed for quiet and remote operation. -
Electric Duo Pump SR 20 HC 2 R
-
Backpack Pump GBP10EVO3
Small, lightweight battery-driven pump with a CORE connection, contained in a backpack. -
Positive Pressure Ventilator (PPV)
Compact and lightweight ventilator with high-flow and high-pressure airstream. Designed for easy deployment and operation. -
Holmatro Catalog
-
Lifting Bags
Designed for maximum safety and control when lifting heavy objects. -
Stack Bags
High-pressure lifting bags, 12 bar / 174 psi system, part of the Holmatro Stack Bags Series. -
Extension Pipe
Extension pipe for instant connection to the ram, to bridge larger gaps. No need to remove the ram head first! -
BESTSELLERV-Strut
For instant, safe stabilization of crashed vehicles. -
NEW!Forcible Entry Tool T1
This hydraulic forcible entry tool allows you to cut, wedge, ram, spread, hammer, and lift. With the T1, you always have the right tool for the job. -
Pentheon Combi Tool PCT14ST
Cordless Combi Tool, part of the Holmatro Pentheon Series. Designed to offer you unrivaled performance, superior usability, advanced connectivity and exceptional serviceability. This multifunctional tool can be used for cutting, spreading and squeezing and is therefore suitable for a variety of applications, ranging from forcible entry to extrication of persons trapped. -
Combi Tool CT 5111
For spreading, cutting and squeezing with one tool - CORE version. -
Combi Tool CT 5114
For spreading, cutting and squeezing with one tool - CORE version. -
Combi Tool CT 5150
Compact and high-performance combi tool for spreading, cutting, squeezing and pulling - CORE version. Part of the 5000 series: no compromise on performance, lowest weight in its class. -
Combi Tool HCT 5111
Hand-operated combi tool that enables spreading, cutting and squeezing. -
Telescopic Ram TR 5370 LP
-
Telescopic Ram TR 5350 LP
-
Telescopic Ram TR 5340 LP
-
Spreader SP 5260
Lightweight spreader for spreading, squeezing and pulling with one tool. Equipped with CORE Technology. -
Spreader SP 5250
Lightweight spreader for spreading, squeezing and pulling with one tool. Equipped with CORE Technology. -
Spreader SP 5240
Lightweight spreader for spreading, squeezing and pulling with one tool. Equipped with CORE Technology. -
Concrete Crusher CC 23
Concrete crusher for quickly breaking away large, thick pieces of collapsed structure. Completely redesigned model: lighter, more compact and with a higher crushing force. -
Cross Ram Support Set XRS01
The new Holmatro Cross Ram Support Set has been developed to facilitate cross ramming: a technique to create space in a deformed vehicle. With the help of a ram the car construction is pushed back into its original shape. -
Door Ram DR200
-
Gas/Petrol Duo Pump SR 20 PC 2 CORE
Petrol driven Spider duo pump, CORE version, with 2 tool connections (MTO). -
Gas/Petrol Duo Pump SR 40 PC 2
Petrol driven Spider duo pump, CORE version, with 2 tool connections (MTO). -
Gas/Petrol Pump SR 10 PC 1
Petrol-driven Spider pump, CORE version, with 1 tool connection (STO). -
Hook Cluster Powershore
Grade 70 Hook Cluster with Mini J, R & T Hooks -
Hose CORE
COaxial Rescue Equipment hose is faster, safer and easier than standard twin line technology. Available in blue, green, orange and black and in standard lengths of 16', 32', 50', 65' and 100'. -
Pulling Attachment Set PAS 07
-
Carrying/Storage Bag V-Strut
Offers room for 2 V-Struts and 1 sheet metal knife.
Showing all 93 results
EN_CA 
FR