Stabilization/Shoring

Showing all 56 results

OmniShore Shoring System
First responders must be able to adapt to every possible situation. Have the ability to change tactics every step of the way. And be smart enough to always think ten steps ahead.
Holmatro
Strut P20

OmniShore pneumatic strut with integrated air cylinder.

Holmatro
Strut P30

OmniShore pneumatic strut with integrated air cylinder.

Holmatro
Strut P40

OmniShore pneumatic strut with integrated air cylinder.

Holmatro
Strut P60

OmniShore pneumatic strut with integrated air cylinder.

Holmatro
Strut M10

OmniShore mechanical strut with double stroke.

Holmatro
Strut H20

OmniShore hydraulic strut with integrated lifting cylinder and integrated stepless mechanical extension

Holmatro
OmniLock Strut P20OL

OmniLock strut with OmniLock Nut. The patented OmniLock system allows you to automatically follow and lock a load in both directions.

Holmatro
OmniLock Strut P30OL

OmniLock strut with OmniLock Nut. The patented OmniLock system allows you to automatically follow and lock a load in both directions.

Holmatro
OmniLock Strut P40OL

OmniLock strut with OmniLock Nut. The patented OmniLock system allows you to automatically follow and lock a load in both directions.

Holmatro
OmniLock Strut P60OL

OmniLock strut with OmniLock Nut. The patented OmniLock system allows you to automatically follow and lock a load in both directions.

Holmatro
Ratchet Base R24
OmniShore Ratchet Base for vehicle stabilization.
Holmatro
Chain Adapter HPL110
OmniShore Chain Adapter for vehicle lifting.
Holmatro
Multi Head HPL140
OmniShore Multi Head for use as a ram head adapter and as a base for the Chain Adapter
Holmatro
OmniLock Nut OL01
OmniLock Nut for upgrading a pneumatic strut to an OmniLock strut: Simply replace the standard locknut by the OmniLock Nut.
Holmatro
OmniLock Drive OL02
OmniLock Drive for electronic operation of an OmniLock strut. Operate the strut remotely with the Wireless Controller or use the buttons on the OmniLock Drive to operate the strut locally.
Holmatro
Wireless Controller WLC50
Wireless Controller for remote operation of multiple OmniLock struts.
Holmatro
Swivel Base BPL10

OmniShore Swivel Base for support against angled or tilting surfaces. Maximum angle 65 degrees. With nailing holes for fastening the base.

Holmatro
Swivel Base D-ring BPL11A

Large OmniShore Swivel Base for support against angled or tilting surfaces.
Holmatro
Rigid Base BPL30
OmniShore Rigid Base for support against perpendicular surfaces. With nailing holes for fastening the base.
Holmatro
Control Unit HTC12
Multifunctional pneumatic control unit with a working pressure of 12 bar / 174 psi.
Holmatro
Pressure Reducer PRV 12
Pressure reducer for air bottles of 300 bar. Complete with 2 m hose
Holmatro
Thrust Block TRB02
OmniShore Thrust Block for attachment of two struts to construct a solid sole raker.
Holmatro
Bipod Base BPL12
OmniShore Bipod Base to construct a bipod for rope rescue applications.
Holmatro
Tripod Head POD03
OmniShore Tripod Head to construct a tripod for rope rescue applications.
Holmatro
Bipod Head POD02
OmniShore Bipod Head to construct a bipod for rope rescue applications.
Holmatro
Monopod Head POD01
OmniShore Monopod Head to construct a monopod for rope rescue applications.
Holmatro
Column Clamp CLA90C
OmniShore Column Clamp to link three struts together. For constructing a three strut column to support the heaviest loads.
Holmatro
Beam Support HPL120
OmniShore Beam Support with nailing holes, for use with wooden beams up to 150 mm / 6 in.
Holmatro
Flat Saddle HPL130
OmniShore Flat Saddle for support of a strut against a flat surface.
Holmatro
Clamp CLA90
OmniShore Clamp to link struts for woodless bracing. To add stability and avoid movement in constructions such as rakers and square post shores.
Holmatro
Nailing Pad CLA90N
OmniShore Nailing Pad for creating wooden braces. To add stability and avoid movement in constructions such as rakers and square post shores.
Holmatro
Raker Rail RR150
OmniShore Raker Rail to distribute forces over a larger surface. For building constructions to support large structures and walls.
Holmatro
Waler Rail WR01
OmniShore Waler Rail for trench wall support.
Holmatro
Earth Nail HEN100
OmniShore Earth Nail to secure large base plates to the ground.
Holmatro
Chain CWH60
OmniShore Chain for lifting heavy vehicles.
Holmatro
Tie Down Keys TDK60
OmniShore Tie Down Keys for attaching a Ratchet Belt to different parts of a vehicle.
Holmatro
Nut Winder MNW80
OmniShore Nut Winder to tighten or loosen the locknut from a distance.
Holmatro
Load Indicator LSE01
OmniShore Load Indicator to signal load shifts in a construction.
Holmatro
Ratchet Belt RBL80
OmniShore Ratchet Belt to secure a strut to a base.
Holmatro
Carrying Strap CST90
OmniShore Carrying Strap for easy transportation of struts.
Holmatro
Power Station PS01
Power Station for wired powering of up to 4 OmniLock Drives.
Holmatro
Pneumatic 10 m Hose Set PHS2
Set with 10 m Air Hoses for operating Pneumatic OmniShore struts. Also suitable for operating Holmatro Lifting Bags and Stack Bags.
Holmatro
Hand Pump PA 09 H 2 S 12
Compact and lightweight hand pump for powering single acting tools.
Holmatro
Pull Restrictor PRS90
Patented OmniShore Pull Restrictor to convert a strut into a brace. The Pull Restrictor secures the locknut to the strut, allowing it to withstand pulling forces and sudden unintended movement.
Holmatro
Raker Rail Pin RRP01
OmniShore Raker Rail Pin to attach bases to a Raker Rail or to connect a second rail.
Holmatro
Shoring Hammer RS15
OmniShore Shoring Hammer for tensioning struts, hammering or pulling nails and multiple other purposes.
Holmatro
Control Unit HDC12
Multifunctional pneumatic control unit with a working pressure of 12 bar / 174 psi.
Holmatro
Lifting Bags
Designed for maximum safety and control when lifting heavy objects.
Holmatro
Stack Bags
High-pressure lifting bags, 12 bar / 174 psi system, part of the Holmatro Stack Bags Series.
Holmatro
BESTSELLER
V-Strut
For instant, safe stabilization of crashed vehicles.
Holmatro
BASK and Quick Response Kits
Our Basic Auto Stabilization Kits and Quick Response Kits were developed for first responders, such as EMS, sheriﬀ, state highway patrol, and local police officers.
Turtle Plastics
Cog Step Chock Kits
Our most popular fire/rescue stabilization product combination is available as part of four different Cog Step Chock kits.
Turtle Plastics
Engine Kits – Auto X Crib Kits
Our most popular kits for any sized fire station.
Turtle Plastics
Auto Crib-It Automatic Stabilization Tools
Stabilize in Seconds!
Power Hawk Technologies Inc.
Carrying/Storage Bag V-Strut
Offers room for 2 V-Struts and 1 sheet metal knife.
Holmatro